Blog

Trade Show Booth Cost: 6 Expenses to Budget For

Fabric trade show booth kit with backwalls, a counter and shelves, a big part of trade show booth cost

Your trade show booth cost is the space fee plus five other expenses. Those are the display, its printed graphics, shipping and material handling, show services, and your team’s travel. Space is usually the biggest single line, but it is often less than half of the total.

The quickest way to budget is to list all six, price each one, and add them up. Below is each expense in the order you will meet it, with published exhibitor prices for 2027 shows.

Where your trade show booth cost goes

The Center for Exhibition Industry Research (CEIR) studies the trade show industry. In its latest survey, floor space was the largest single expense, at 40.5% of what exhibitors spend directly [1]. Put simply, about $40 of every $100 went to space.

Treat that as a survey average, not a rule. If your spending matched it, your total trade show booth cost would be about two and a half times your space fee. A small booth with a light display and a short drive could come in well under that. A big booth with flights and hotels could go over. Use the benchmark as a rough check, then build your real number line by line.

Here are the six expenses in a typical trade show booth cost:

ExpenseWhat it coversWho you pay
Booth spaceYour 10×10 or larger spot on the floorThe show organizer
DisplayFrames, stands, counter, podium, lightsA display company
GraphicsThe printed fabric or vinyl on the displayYour printer (often part of the display price)
Shipping and material handlingGetting freight to the venue, then moving it inside the hallA carrier, plus the show’s freight contractor
Show servicesPower, carpet, furniture, internetThe show’s contractors
Travel and staffFlights or mileage, hotel, meals, wagesYour company

The space price is the one you see first, so it is easy to budget for it alone. The other lines show up later, in the exhibitor kit. That is the show’s packet of order forms, rules and deadlines.

Booth space: published prices for 2027 shows

Each show sets its own space prices. Here are two published price lists for 2027:

  • APS Global Physics Summit, Georgia World Congress Center, Atlanta (April 2027): a 10×10 inline booth lists at $3,700. In Zone A, the premium spots near the hall entrance, it is $4,700. A 10×20 booth runs from $7,550 to $10,200 [2].
  • TCEA Convention & Exposition (2027): a 10×10 inline booth is $1,450 and a corner is $1,550 [3].

That is a gap of more than three times for the same 100 square feet. Corner booths, open on two sides, cost a little more than inline booths, which have neighbors on both sides.

Read what the space fee includes. At the APS Summit, each 10×10 comes with four passes, an app listing, one company sign and basic internet. The page then says “all other services are additional” [2]. TCEA includes back and side drapes and a small company sign, but not power, internet, carpet or furniture [3].

The display and its graphics

Of all six lines, only the display can be reused. Our booth kits put printed fabric on light aluminum frames that come apart for travel. The same booth can go to many shows, and later you can order new graphics for the same frames.

10x10 trade show booth kit with printed fabric backwalls, a podium, a TV mount and LED lights

Here are four of our displays and what each listing says is included. Each product page shows its current starting price, and you see your full price once you choose a size and options. Shipping is added at checkout.

DisplayWhat the listing says is included
Standard Retractable banner standPrinted graphic, aluminum base with fold-out feet, carry bag
6ft Table CoverPrinted cover for a standard 6-foot table (the table is not included)
Straight Tension Fabric DisplayPrinted fabric backdrop, tool-free tube frame with feet, carry bag
10x10ft Custom Booth A12 printed backwalls, a podium with its own printed wrap, a brochure stand, a fabric shelf, a TV mount and 2 LED lights

Check one thing before you add up the display and graphics lines. Many displays, including every product above, come with the printed graphic already included. If yours does, put it under display and leave the graphics line at zero. Count graphics on their own only when you are reusing frames you already own and ordering new prints.

Cost per show vs. what you pay up front

There are two ways to look at a display’s price. Say a booth kit serves five shows. Its cost per show is one fifth of the price. That number helps you judge whether exhibiting is worth it over a year.

Your cash budget for the first show is different. You pay the full price before that show, so put the whole amount in your first budget. Spread it out only when you compare costs over several shows.

Shipping and material handling

This line of your trade show booth cost has two parts. Budget for both.

Soft canvas bag and hard cases used to pack and ship the frames and podium of a booth kit

Shipping is getting your freight to the venue and back. You pay a carrier, such as a parcel service or a freight company. If the show is local, you may be able to bring a light display in your own car.

Material handling, also called drayage, is what happens inside the venue. It covers unloading at the hall, delivery to your booth, storing your empty boxes, and loading up at the end [4]. You pay it to the company the show hires to move freight, often called the official contractor.

Material handling is usually priced by weight, and the rules come from your show’s contractor. GES, one of the large contractors, says its rates depend on how much your freight weighs and whether it arrives inside the posted dates [4]. Under GES Material Handling+, shipments weighing less than 25 pounds are billed at a flat rate [4]. Other contractors and shows can set different terms, so check your show’s.

Watch for minimum charges. An older GES shipping sheet, from a 2019 show, set a minimum weight for each charge [5]. A minimum means a light box can cost as much as a much heavier one. The same sheet notes that some booth packages include a set amount of free drayage [5]. Look for both in your exhibitor kit.

Two simple ways to keep this line down:

  • Ship fewer, lighter pieces. A fabric backdrop in a soft bag weighs far less than a hard crate.
  • Have your freight arrive inside the posted dates, so you pay the standard rate, not the late one [4].

Show services

Most booths need a few services that the space fee does not include. Each one adds to your trade show booth cost. TCEA is a good example. Power, internet, carpet and furniture are all extra there, and flooring is required [3]. You can rent these from the show’s contractors or bring your own carpet and furniture [3].

Check what your show allows before you pack a rug. If the kit lists an early-order price, order before that date, and write every deadline in your calendar the day the kit arrives.

Travel and staff

The last line is your own team. Count flights or mileage, hotel nights, meals and the hours your people spend away from normal work. A local show, such as one at the Georgia World Congress Center for an Atlanta company, cuts hotel and flight costs.

A worked example (illustrative only)

Here is how to lay out a first trade show booth cost. It uses the APS Summit’s standard 10×10 price [2]. The other lines stay open until you have real quotes, and your show and options will differ.

LineExampleAmount
Booth space10×10 inline, standard zone$3,700
Display, with graphicsA 10×10 booth kitYour quote
ExtrasA table cover and one banner standYour quote
Shipping and material handlingFrom your carrier and the exhibitor kitYour quote
Show servicesPower, carpet, furniture from the exhibitor kitYour quote
Travel and staffYour teamYour estimate
Known so far$3,700

Now compare with the survey benchmark. If spending followed the CEIR average, a $3,700 space would sit inside a total of about $9,100 [1]. That leaves roughly $5,400 for the five open lines. If your real quotes for those lines come in far higher, look again at booth size, freight weight and travel.

If you buy a booth kit, its price is the full first-show payment. Over five shows, its cost per show would be one fifth of that price.

Questions to ask before you book the space

Ask these before you sign. Each answer changes your trade show booth cost, and the exhibitor kit or the show’s sales team can answer all of them.

  1. What does the space fee include? Look for passes, a sign, drapes and internet [2][3].
  2. Is flooring required, and can you bring your own carpet and furniture [3]?
  3. Who is the freight contractor, and what are its material handling rates and minimums [4][5]?
  4. What are the posted delivery dates for the warehouse and the hall [4]?
  5. Does your booth package include any free drayage, and can you hand-carry small items [5]?
  6. Is there an early-order price for power and other services?

Write the answers next to each line of your budget. Gaps in the answers are where surprise costs come from.

Limits of these numbers

The space prices come from two shows, so treat them as examples, not averages. Space prices, material handling rates and service fees change every year, and they differ by show, venue and city. Always use the current exhibitor kit for your show when you set your trade show booth cost.

How we can help

The display and graphics are the part of your trade show booth cost you control most. Browse our trade show displays, from fabric backdrops and SEG lightboxes to complete booth kits. Replacement frames, cases and lights are in our accessories.

No print-ready artwork yet? Our design team can create it, and you can check the mockup and ask for changes first. Questions about a show date? Contact us before you order.

Frequently asked questions

Is a 10×10 booth enough for a first show?

For most small businesses, yes. A 10×10 is the smallest full booth in both price lists above [2][3]. One backwall, a table and a banner stand fill it. Move up to a 10×20 once you know the show works for you.

Is a corner booth worth the extra cost?

A corner is open on two sides, so people can walk in from more directions. In both 2027 price lists, a 10×10 corner cost $100 to $400 more than an inline booth [2][3]. If your display looks good from the side, the corner can pay off.

Does the trade show booth cost include a table?

Usually not. At TCEA, furniture is extra, though you may bring your own [3]. A folding table with a fitted printed cover is a simple way to handle it.

Blue fitted table cover printed with a sample logo

How can I lower material handling costs?

Ship light, ship fewer pieces, and make sure your freight arrives inside the posted dates [4]. Some shows let you hand-carry small items to your booth under their own rules [5]. Check the exhibitor kit first.

Can I reuse my booth next year with a new design?

Yes, if the frames are in good shape. Our booth kits are built so you can order the printed graphics on their own when you want a fresh look, and keep the frames. So the display line for later shows can be smaller than for the first.

Sources

  1. Where Exhibitors Spend Their Budget, by Nancy Drapeau, CEIR (TSNN, April 21, 2026): exhibit space at 40.5% of exhibitor direct spend (survey)
  2. Exhibit at the 2027 APS Global Physics Summit, American Physical Society: GWCC booth prices, Zone A, what the 10×10 includes
  3. 2027 Booth Pricing Information, TCEA Convention & Exposition: 10×10 prices, what the fee includes and excludes
  4. Material Handling Made Easy, GES: what material handling covers, weight-based rates, posted dates, Material Handling+ flat rate under 25 lb
  5. Shipping Information sheet, GES (2019 show): minimum charge, complimentary drayage in booth packages, hand-carry option
author-avatar

About Marwyn Allen

Founder & CEO, 15X Business Solutions Serial Entrepreneur | Growth Strategist